processwests new generation 3 fuel anti-surge system is the ultimate in fuel delivery for your turbocharged Falcon.

The new system sees the pump (or pumps) mounted internally to an externally mounted anti-surge vessel. The vessel is mounted to the chassis rail just like the original Process West anti-surge system... this is not an in-tank system.

One of the main objectives when designing the system was making sure the system was easily upgradable when the need for higher fuel flows is required. The "basic" system comes installed with 1 x Walbro 460LPH pump/wiring harness and is a simple plug and play option.

A second or third Walbro 460 can be easily added to the system either at the time of purchase or later down the track when the demand for greater fuel supply is required. We have a package that allows the second pump or third  to be installed along with a Turbosmart FPR8 fuel pressure regulator and all of the necessary hardware for easy installation with the factory fuel rail. 

Alternatively if you have an aftermarket dual entry fuel rail we have a complete fitting kit including Turbosmart FPR8 regulator.

If you have purchased the primary fuel system (PWFGFPS) and want to add an additional pump or two you need the additional pump kit. Kit comes complete with wiring and is an easy fit.

The wiring harness comes pre-made with pins that simply plug into the primary wiring harness supplied with the primary fuel system.

Allows easy integration of the Turbosmart FPR8 fuel pressure regulator into the Process West primary fuel system. Designed to suit the factory fuel rail. If you have an aftermarket fuel rail go here for the stage 2 fitting kit

Allows easy integration of the Turbosmart FPR8 fuel pressure regulator into the Process West primary fuel system. Designed to suit either the Process West fuel rail or other aftermarket rails.

-8 supply to and from the fuel rail. The ultimate set up for big fuel supply.

Our stage 3 core for the FG has long been the market leader. The time has come to step things up  for those of you looking for extreme power levels.

Introducing the STAGE 4

Largest, most efficient core on the market.  500 x 425 x 152mm of bar and plate goodness.

3.5in inlet/outlets

The “core only” part number comes with a replacement front re-enforcement bar. Air conditioning condensor is retained.

Our stage 3 core for the FG has long been the market leader. The time has come to step things up  for those of you looking for extreme power levels.

Introducing the STAGE 4

Largest, most efficient core on the market.  500 x 425 x 152mm of bar and plate goodness.

3.5in inlet/outlets

3in hot side piping

3.5in cold side piping.